phmkp...rectangular steel vishay esta document number: 13005 revision 11-nov-02 www.vishay.com 19 capacitors in rectangular steel casing application estaprop phmkp-type capacitors in rectangular steel casing have been designed for power factor correction in low voltage plants. loads as motors and transformers consume real power as well as reactive power. generators, supply cables, and other electrical distribution equipment should be relieved from reactive power. estaprop capacitors may be used for: areas with dust and moisture, which require a high degree of protection free standing, fixed individual-pfc (e.g. motors, transformers, lightning) ? free standing, fixed central-pfc (e.g. group of loads) ? harmonic trap (e.g. ups, frequency drives, converter) design the estaprop mkp capacitor in steel casing consists of a number of three-phase tubular can type capacitors (see phmkp... cylindrical aluminum). the individual aluminum cans are wired together and mounted onto a steel frame. the steel frame together with the cans is housed in a common sheet steel casing. the supply cable may be connected at three or six threaded studs, on top of the capacitor. a threaded stud m10 for grounding is available. easy mounting will be ensured by 4 drillings, at the bottom of the container. this design ensures highest safety by: self healing technology over pressure tear-off fuse robust steel container massive connection studs rectangular capacitor, ip43 rectangular capacitor, ip00 rectangular capacitor, open circuit, 6 terminals rectangular capacitor, with hrc-fuses or isolator estaprop /estadry power factor correction capacitors low voltage
phmkp...rectangular steel vishay esta document number: 13005 revision 11-nov-02 www.vishay.com 20 standards: iec 60831-1+2, en 60831-1+2, vde 0560-46+47 overvoltages: ucn + 10% (up to 8 hours daily) (in accordance with the above standards) ucn + 15% (up to 30 minutes daily) ucn + 20% (up to 5 minutes) ucn + 30% (up to 1 minute) please also refer to terms and definitions overcurrent: 1.3 * in, (in accordance with the above standards) 1.5 * in with 10% overvoltages, 15% overcapacitance and harmonics included, continuous operation please also refer to terms and definitions tolerance on capacitance: ?5/ + 10% in accordance with the standards 5% as vishay esta standard test voltage, terminal / terminal: 2.15* ucn, ac, 2 seconds test voltage, terminal / casing: 4800vac, 2 seconds inrush current: 300 times rated current in losses: < 0.50w / kvar (inclusive discharge resistors) statistical life expectancy: > 100,000 operating hours degree of protection: ip00, ip43, ip54, indoor mounting permitted ambient temperature: ?25 / up to 55? (depending on output) permitted casing temperature: max. 60? (measured on top of the capacitor) cooling: naturally air-cooled permissible relative humidity: maximum 95% maximum allowed altitude: 2000 meters above sea level mounting position: vertical and horizontal mounting: 4 drillings, 9mm, at the bottom of the container safety features: all-phase over pressure tear-off fuse, self-healing casing: sheet steel casing, colour ral 7033 dielectric: polypropylene film, self-healing impregnant: natural oil, non-pcb, biodegradable (estaprop ) (of the tubular capacitors inside) or dry / gas - filled (estadry ) terminals: threaded studs, m6, m8, m12 technical data estaprop /estadry power factor correction capacitors low voltage
phmkp...rectangular steel vishay esta document number: 13005 revision 11-nov-02 www.vishay.com 21 type article output cap acitance current dimensions cable weight drawing no. kvar f a l*w*h (mm) entry kg no. phmkp400/10 33257 10 3*66.3 14.4 260*135*525 lt21 5 4 phmkp400/12,5 33258 12.5 3*82.9 18 260*135*525 lt21 5 4 phmkp400/15 33259 15 3*99.5 21.6 260*135*525 lt21 6 4 phmkp400/16,7 33260 16.7 3*110.7 24.1 260*135*525 lt21 6 4 phmkp400/20 33261 20 3*133 28.9 260*135*525 lt21 6.5 4 phmkp400/25 33262 25 3*166 36 260*135*525 lt21 6.5 4 phmkp400/30 33263 30 3*199 43.3 260*135*525 lt29 8 4 phmkp400/33,3 33264 33.3 3*221 48 260*135*525 lt29 8 4 phmkp400/40 33265 40 3*265 57.7 260*135*525 lt29 9 4 phmkp400/50 33266 50 3*332 72.2 260*135*525 lt29 10 4 phmkp400/60 33267 60 3*398 86.6 260*135*525 lt36 11 4 phmkp400/66,7 33268 66.7 3*442 96.3 260*135*525 lt36 12.5 4 phmkp400/70 33269 70 3*464 101 395*135*525 lt36 13 4 phmkp400/75 33270 75 3*497 108 395*135*525 lt36 14 4 phmkp400/83,3 33271 83.3 3*552 120 395*135*525 lt36 15 4 phmkp400/100 33272 100 3*663 144 395*135*525 lt42 17 4 capacitors in rectangular steel casing, ip43 *can be used also for 415 v, with full overvoltage range. type article output cap acitance current dimensions cable weight drawing no. kvar f a l*w*h (mm) entry** kg no. phmkp400/10be 33240 10 3*66.3 14.4 260*135*445 lt21 5 5 phmkp400/12,5be 33241 12.5 3*82.9 18 260*135*445 lt21 5 5 phmkp400/15be 33242 15 3*99.5 21.6 260*135*445 lt21 6 5 phmkp400/16,7be 33243 16.7 3*110.7 24.1 260*135*445 lt21 6 5 phmkp400/20be 33244 20 3*133 28.9 260*135*445 lt21 6.5 5 phmkp400/25be 33245 25 3*166 36 260*135*445 lt21 6.5 5 phmkp400/30be 33246 30 3*199 43.3 260*135*445 lt29 8 5 phmkp400/33,3be 33247 33.3 3*221 48 260*135*445 lt29 8 5 phmkp400/40be 33248 40 3*265 57.7 260*135*445 lt29 9 5 phmkp400/50be 33249 50 3*332 72.2 260*135*445 lt29 10 5 phmkp400/60be 33183 60 3*398 86.6 260*135*445 lt36 11 5 phmkp400/66,7be 33250 66.7 3*442 96.3 260*135*445 lt36 12.5 5 phmkp400/70be 33251 70 3*464 101 395*135*445 lt36 13 5 phmkp400/75be 33252 75 3*497 108 395*135*445 lt36 14 5 phmkp400/83,3be 33253 83.3 3*552 120 395*135*445 lt36 15 5 phmkp400/100be 33254 100 3*663 144 395*135*445 lt42 17 5 capacitors in rectangular steel casing, ip00 all oil-impregnated part types can also be produced in a phmkpg dry version. dimensions and ratings are unchanged. dry types are not standard stock items, with production upon request. estaprop /estadry power factor correction capacitors low voltage rated voltage 400v*, 50hz, 3-phase, delta connection rated voltage 400v*, 50 hz, 3-phase, delta connection other voltage ratings, outputs, and frequencies upon request. all phmkp-type capacitors may be used for 60hz, the output will be 1.2 times higher. *can be used also for 415v, with full overvoltage range. **when using terminal covers for ip43 or ip54 (please refer to next page). drawings at end of datasheet.
phmkp...rectangular steel vishay esta document number: 13005 revision 11-nov-02 www.vishay.com 22 other voltage ratings, outputs, and frequencies upon request. all phmkp-type capacitors may be used for 60hz, the output will be 1.2 times higher. all oil-impregnated part types can also be produced in a phmkpg dry version. dimensions and ratings are unchanged. dry types are not standard stock items, with production upon request. terminal cover / cable connection box type article output cap acitance current dimensions cable weight drawing no. kvar f a l*w*h (mm) entry kg no. phmkp400/5/6 11049 5 3*33.2 7.5 183*90*300 2 x lt16 3 8 phmkp400/7.5/6 11050 7.5 3*49.7 10.8 183*90*300 2 x lt16 4 8 phmkp400/10/6 11051 10 3*66.3 14.4 183*90*300 2 x lt16 4 8 phmkp400/12.5/6 11052 12.5 3*82.9 18 183*90*300 2 x lt16 5 8 phmkp400/15/6 11053 15 3*99.5 21.6 183*90*300 2 x lt16 5 8 phmkp400/16.7/6 11054 16.7 3*110 24.1 183*90*300 2 x lt16 5 8 phmkp400/20/6 11055 20 3*133 28.9 183*90*495 lt29 + 21 6.5 9 phmkp400/25/6 11056 25 3*166 36 183*90*495 lt29 + 21 7.5 9 phmkp400/30/6 33273 30 3*199 43.3 260*135*525 lt29 + 21 9 9 phmkp400/33.3/6 33274 33.3 3*221 48 260*135*525 lt29 + 21 10 9 phmkp400/40/6 33275 40 3*265 57.7 260*135*525 lt29 + 21 11 9 phmkp400/50/6 33276 50 3*332 72.2 395*135*525 lt29 + 21 12 9 phmkp400/60/6 33277 60 3*398 86.6 395*135*525 lt36 + 29 13 9 phmkp400/66.7/6 33278 66.7 3*442 96.3 395*135*525 lt36 + 29 14 9 capacitors in rectangular steel casing, open circuit, 6 terminals, ip43 *can be used also for 415v, with full overvoltage range. drawings at end of datasheet. estaprop /estadry power factor correction capacitors low voltage type article degree of for capacitor output drawing no. protection in kvar no. becover 43.10 11141 ip43 10 - 50 6 becover 43.60 18730 ip43 60 - 83.3 6 becover 43.100 18731 ip43 100 7 becover 54.10 26126 ip54 10 - 50 6 becover 54.60 26127 ip54 60 - 83.3 6 becover 54.100 26128 ip54 100 7 rated voltage 400v*, 50 hz
phmkp...rectangular steel vishay esta document number: 13005 revision 11-nov-02 www.vishay.com 23 other voltage ratings, outputs, and frequencies upon request. all phmkp-type capacitors may be used for 60hz, the output will be 1.2 times higher. all oil-impregnated part types can also be produced in a phmkpg dry version. dimensions and ratings are unchanged. dry types are not standard stock items, with production upon request. type article output cap acitance current dimensions hcr fuse cable drawing no. kvar f a l*w*h (mm) a ** entry no. phmkp400/10/si 33279 10 3*66.3 14.4 260*135*525 3 x 36 pg 21 10 phmkp400/12,5/si 33280 12.5 3*82.9 18 260*135*525 3 x 50 pg 21 10 phmkp400/15/si 33281 15 3*21.6 2 260*135*525 3 x 50 pg 21 10 phmkp400/16,7/si 33282 16.7 3*110 24.1 260*135*525 3 x 50 pg 29 10 phmkp400/20/si 33283 20 3*133 28.9 260*135*525 3 x 63 pg 29 10 phmkp400/25/si 33284 25 3*166 36 260*135*525 3 x 80 pg 29 10 phmkp400/30/si 33285 30 3*199 43.3 260*135*525 3 x 100 pg 36 10 phmkp400/33.3/si 33286 33.3 3*221 48 260*135*525 3 x 100 pg 36 10 phmkp400/40/si 33287 40 3*265 57.7 260*135*525 3 x 125 pg 36 10 phmkp400/50/si 33288 50 3*332 72.2 395*135*525 3 x 125 pg 36 10 phmkp400/60/si 33289 60 3*398 86.6 395*135*525 3 x 160 pg 42 10 phmkp400/66,7/si 33290 66.7 3*442 96.3 395*135*525 3 x 160 pg 42 10 capacitors in rectangular steel casing, hrc-fuses incorporated, ip31 *can be used also for 415v, with full overvoltage range. **hrc low-voltage delay-action fuse type article output capacitance current dimensions cable drawing no. kvar f a l*w*h (mm) entry no. phmkp400/10/lt 33291 10 3 * 66.3 14.4 260 * 135 * 525 pg 21 11 phmkp400/12,5/lt 33292 12.5 3 * 82.9 18 260 * 135 * 525 pg 21 11 phmkp400/15/lt 33293 15 3 * 99.5 21.6 260 * 135 * 525 pg 21 11 phmkp400/16,7/lt 33294 16.7 3 * 110 24.1 260 * 135 * 525 pg 29 11 phmkp400/20/lt 33295 20 3 * 133 28.9 260 * 135 * 525 pg 29 11 phmkp400/25/lt 33296 25 3 * 166 36 260 * 135 * 525 pg 29 11 phmkp400/30/lt 33297 30 3 * 199 43.3 260 * 135 * 525 pg 36 11 phmkp400/33.3/lt 33298 33.3 3 * 221 48 260 * 135 * 525 pg 36 11 phmkp400/40/lt 33299 40 3 * 265 57.7 260 * 135 * 525 pg 36 11 phmkp400/50/lt 33300 50 3 * 332 72.2 395 * 135 * 525 pg 36 11 phmkp400/60/lt 33301 60 3 * 398 86.6 395 * 135 * 525 pg 42 11 phmkp400/66,7/lt 33302 66.7 3 * 442 96.3 395 * 135 * 525 pg 42 11 capacitors in rectangular steel casing, isolator and fuses incorporated, ip31 estaprop /estadry power factor correction capacitors low voltage rated voltage 400v*, 50 hz, 3-phase, delta connection rated voltage 400v*, 50 hz, 3-phase, delta connection rated voltage 400v*, 50 hz, 3-phase, delta connection
phmkp...rectangular steel vishay esta document number: 13005 revision 11-nov-02 www.vishay.com 24 estaprop /estadry power factor correction capacitors low voltage drawing 4 rectangular-type capacitor, three phase, ip43 drawing 5 rectangular-type, be-capacitor, three phase, ip00 445mm high drawing 6 terminal cover for be-capacitor, 10 - 83.3kvar l l+24 135 ? 46 525 75 32 32 l+42 72 m10 ? 9 64 l+ 24 l 135 72 9 l+ 42 32 64 525 32 46 m10 h 135 l+24 221 43 43 l+42 75 ? 9 m10 l m12 m12 135 l+ 24 l+ 42 l m10 221 43 43 75 h 254 107 124 50 254 124 107 50 drawing 8 rectangular-type capacitor open circuit, 6 terminals, 183*90*300mm drawing 9 rectangular-type capacitor, open circuit, 6 terminals, 525mm high drawing 7 terminal cover for be-capacitor, 100kvar 525 260 105 110 40 525 260 105 40 110 205 28 28 ? 7 m5 183 300 355 90 v x u z w y 28 223 60 m6 223 205 m5 m6 7 28 28 60 28 355 300 183 90 l l+24 w ? 53 46 525 75 32 l+42 m10 ? 9 64 50 u v w z x y m12 m12 m10 9 l+ 42 50 32 75 525 46 w l+ 24 l w v u y x z 64 53 dimensions
phmkp...rectangular steel vishay esta document number: 13005 revision 11-nov-02 www.vishay.com 25 minimum order quantity per type and order: 1 unit ordering information drawing 10 si-type rectangular-type capacitor, three phase, including hrc- fuses drawing 11 lt-type rectangular-type capacitor, three phase, including isolator pg 525 135 75 m 10 l+42 ? 9 m8 l+24 l 135 pg l l+ 24 l+ 42 m10 9 m8 135 525 75 135 l+42 l+85 135 525 75 9 l l+24 l+ 85 l l+ 24 l+ 42 9 135 525 75 estaprop /estadry power factor correction capacitors low voltage dimensions terminal style recommended torque terminals m6 3nm terminals m8 6nm terminals m10 10nm terminals m12 15.5nm recommended torques: output in kvar / 400v, 50hz pg in mm 1 . . 7.5 16 22.5 10 . . 20 21 28.5 25 . . 40 29 38 50 . . 75 36 48 83.3 . . 100 42 55 cable glands: delivery time delivery time is approximately 3 - 4 weeks
|
